Best Values
| $21K Guaranteed Business for Kitchen Grease Exhaust Cleaners | $3,000.00 |
Complete Mosmatic Duct Spinner Set Up for Hood Cleaners
The Complete Duct Spinning Set up for Kitchen Grease Exhaust Cleaners
Saves over purchasing each item individually.
Includes:
- Duct Spinner (choose size below: 3", 6", 12", 16", 20" or 24" diameter) Recommend 6"
- Nozzles (2- 0 Degrees for extra cleaning)
- Choose Length of High Pressure Hose (choose from 15', 25', 50', 75', 100' or 150') Recommend 50' Hose
- High Pressure Ball Valve
- Includes Quick Disconnects
Step 1: Choose the type of Duct Spinner Fixed vs Adjustable Angle
VS
Fixed Angle is the Recommend Unit for Hood Cleaners
The complete stainless versions of these various cleaning units are specially designed for use with water and cleaning additive at high r.p.m. - Use MOSMATIC cleaning equipment in conjunction with hot/cold water high pressure pumps to efficiently remove dirt and grime. MOSMATIC Duct Cleaners for quick and easy cleaning of: Ducts, Vents, Pipes, Kegs, Chutes, Chimneys, Gutters, Barrels, Containers, Drains, Hoods, etc.
Type: TXR-2s
- for 2 Nozzles 1/8" NPT *adjustable*
- Throughput Medium: water, cleaning additive pH 3-12
- Pressure: 4000 psi
- Temperature: 40°F - 250°F
- R.P.M.: 2000 r.p.m.
- Flow Rate: depending on pump performance
- Body DXG: brass, nickel plated
- Head: brass, nickel plated
- Rotor Guard: stainless steel
- Nominal Width: NW 1/4"
Available in 3", 6", 12", 16", 20" or 24"-- Please specify below.
Step 2: Type of Nozzles for your Spinner
They come in 0 and 15 degrees. 0 degree is the recommended nozzle for hood cleaners cleaning large diameter ducts, and 15 degrees for small diameter ducts.
To ensure the correct size nozzle, please enter the GPM and PSI of the machine that you will be using the Duct Spinner.
Step 3: Choose the Length of High Pressure Hose
This R2, 4500 PSI, 2 Wire Braid, 250' F, with Red Solid and Swivel ends. Comes in either 15, 25, 50, 75, 100 or 150 foot long sections. 50 foot section is the recommend length with the Fixed end screwed into the Duct Spinner.
Step 4: Includes High Pressure Ball Valve
Step 5: Includes 3 Quick Disconnects
X1
x1
x1
- Item #: DuctSpinnerKit
- Manufacturer: Mosmatic
